Tex: +86-18157453060 | Email: info@volcanomotor.comone-stop partner for motors & motor drives designing and manufacturing

Volcano Motor

Home > Products > Motor power-Brushless Motor > 1 HP Brushless DC Motor
1.1KW Centrifugal Pump Motor
1.1KW Centrifugal Pump Motor

    1.1KW Centrifugal Pump Motor

    • Model Number:BLDC1.1-100
    • Type:Brushless DC Motor
    • Output Power:1.1KW
    • DC Voltage:72V DC, 220V AC, 380V AC
    • Speed Range:2900RPM
    • Poles:4P, 6P, 8P…
    1. Detailed information
    Brand Name:Volcano ElectricModel Number:BLDC1.1-100Type:Brushless DC Motor
    Output Power:1.1KWDC Voltage:72V DC, 220V AC, 380V ACSpeed Range:2900 RPM
    Controller:Customized, OptionalBraker:OptionalInsulation Class:Class B/F/H
    Enclosure:IP44 / IP54Poles:4P, 6P, 8P…Wire:100% copper
    Housing:AluminumEfficiency:IE3.0 , IE 4.0

    Duty:S1 (continuous)Place of Origin:Zhejiang, China (Mainland)Standard:IEC / NEMA standard
    Application:variable speed pumps, constant pressure pumps

    At what applications you need Brushless DC motors replace conventional wound AC motors.


    Any one of the below requirements.

    1. Variable speed application

    2. Require High Start Torque

    3. Low /High speed application

    4. Minimize Motor size demands

    5. Customized Speed, work at any defined speed, ( the rated speed of AC motor is limited, 2 poles-3000RPM, 4 poles -1500RPM @50HZ, 2 poles-3600RPM, 4 poles -1800RPM @60HZ)


    Product Description

    Intelligent pump systems that improve the way you use water and provide added value, accommodate a wide range of flow demand, allowing to use the water they need, when they need it.


    Currently, the VFD(Variable speed driver) + AC motor pumps system is used to achieve the constant pressure. But efficiency is not high, there is a lot of energy waste of this systems. Because the efficiency of AC motor reduce sharply while excess the rated speed. Compared to AC motors, brushless DC motors have higher efficiency for a wide speeds. Therefore, the brushless DC motor+ controller is tending to replace the VFD+AC motor pump system.


    Various Constant Pressure Pump Systems

    　VFD + AC MotorController + PM Motor
    AdvantagesIntelligent pump systems that improve theway you use water and provide added value,accommodate a wide range of flowdemand, allowing to use the water they need, when they need it.
    VFD/Controller Efficiency95%-98%
    The signal is not sinesoid,weaken the motor efficiency    		>98%
    Motor EfficiencyRated Speed70%-85%>88%
    Variable speedreduce sharplyMaintain at high level, over 80%
    Example P=750W75-85% @ Rated Speed
    lower than 70% @500RPM    		over 88% @ Rated Speed
    Maintain at 80% @500RPM
    Start TorqueLowHigh
    High Speed Ability2 poles-3000 RPM
    4 poles-1500RPM
    @50HZ    		10,000+ RPM
    Cost-a little higher
    InstallIEC/NEMA/Customized ,substitute for each, noneed to rebuild the pump structure
    *The PM motor is able to control at lowspeed with high efficiency. 
    The PM motor system has high efficiency

    1.1KW 2900RPM Centrifugal Pump motor is one of our brushless DC motor motors used in centrifugal pumps. Which replace the same power AC motors. The efficiency is much higher though the initial cost is a little higher. But for long terms, the energy saving of Brushless DC motors and free maintenance, the benefits you get will obviously considerable.


    Configuration

    1472364006147747.png

    *CAN MAKE ACCORDING TO YOUR REQUIRMENT


    Advantage of Brushless DC motors

    • Lower maintenance and longer lifetime- no brush and commutator erosion

    • Lower noise-the elimination of brush contact

    • Higher power to weight ratio

    • Higher efficiency ( in general higher than 90%)

    • Lower temperature rise-more efficient heat dissipation due to winding construction

    • Reduction of EMI


    For customized DC Motors, please contact our technician, Ordinary, we have to know the following information to get a professional proposal:

    • Brushed or Brushless   Customer preference

    • Output power (W)   Horsepower/watts/torque rated at full load speed

    • Voltage (V)   i.e 12v DC …….. 220v AC

    • Motor speed (RPM)   Revolutions per minute of the shaft at full load Voltage 

    • Application   e.g. traction, airconditioning, etc.

    • Duty     Most motors are rated continuous. Some applications however may use motors designed for intermittent duty

    • Configuration/Frame    Our products are according to IEC standard, we also can customize the flange and shaft according to the customer drawing 

    • Controller function     e.g. forward/reverse, variable speed, acceleration profile, etc.

    You may like:

    Copyright © Ningbo volcanic electric co.,LTD