380Vac 55000W Permanent Magnet Synchronous Motor
- Model Number:VOL-HSD-CYJ-55
- Type:PMSM Motor
- Output Power:55000W
- Speed Range:0-238RPM
|Brand Name:||Volcano Electric||Model Number:||VOL-HSD-CYJ-55||Type:||PMSM Motor|
|Output Power:||55Kw||DC Voltage:||380Vac||Speed Range:||0-238RPM|
|Controller:||Customized, Optional||Braker:||Optional||Insulation Class:||Class H|
|Housing:||Aluminum Frame||Efficiency:||IE4||Duty:||S1 (continuous)|
|Place of Origin:||Zhejiang, China (Mainland)||Standard:||Permanent Magnet motors|
For the model VOL - HSD-CYJ-55, which is the most powerful model in this series, and the motor can change the stroke frequency by adjusting the motor frequency, thus thoroughly solving the problem of low stroke frequency in intermittent pumping wells and lean oil wells, and running smoothly.
The motor adopts a belt-less drive structure, which greatly simplifies the structure, at the same time, the system is safer and the service life is prolonged. At the same time, this motor also has the advantages of high transmission efficiency and high precision.
If you are interested for this model, please feel free to contact us by firstname.lastname@example.org
PMSM motor list
Moment of inertia
Advantages of PMSM motor:
Lower Maintainance and longer lifetime
Lower noise - the elimination of brush contact
Higher power to weight ratio
Higher efficiency ( in general higher than 90%)
Lower temperature rise-more efficient heat dissipation due to winding construction
Reduction of EMI
For customized DC Motors, please contact our technician, Ordinary, we have to know the following information to get a professional proposal:
Brushed or Brushless Customer preference
Output power (W) Horsepower/watts/torque rated at full load speed
Voltage (V) i.e 12v DC …….. 220v AC
Motor speed (RPM) Revolutions per minute of the shaft at full load Voltage
Application e.g. traction, airconditioning, etc.
Duty Most motors are rated continuous. Some applications however may use motors designed for intermittent duty
Configuration/Frame Our products are according to IEC standard, we also can customize the flange and shaft according to the customer drawing
Controller function e.g. forward/reverse, variable speed, acceleration profile, etc.