60mm 12 Slots 10 Poles Stator Winding For BLDC Motor

Product Description

Have Volcano, you are specialist of PMDC motor.  

Regarding the item of VOL-WSRS60 12S, while the engineer design the motor, they could always use this type to assemble the motor. The stator is designed by single tooth mould, so while the motor is in the mass production, it will be produced very fast, it is designed for big quantity.

In an electric motor, the stator provides a rotating magnetic field that drives the rotating armature; in a generator, the stator converts the rotating magnetic field to electric current. In fluid powered devices, the stator guides the flow of fluid to or from the rotating part of the system.

We insist that quality and honesty come first. Waiting for you and feel free to contact our team at info@volcanomotor.com for any technical support.

Multi Strands Showing

Motor construction

Brushless dc motor also have the stator and rotor same like the common dc motor, but it cancel the brushes. The stator used by silicon steel sheet and the rotor make by permanent magnet. It can be 2 poles to 8 poles just as you wish. Different with the brushes dc motor, the commutation of the BLDC motor is electronically controlled. We will use the hall sensors to do it. Also can use the magnetic encoder.

Specifications

Detailed Images

THE PICTURE SHOWS THE DIMENSIONAL STATOR

WE CAN MAKE ACCORDING  TO YOUR  REQUIRMENT

Winding stator and rotor list

Advantage of our single tooth winding stator and rotor

• Reduce eddy current

• Lower noise

• Cools the stator core

• Reduces hysteresis loss

• Higher coil filling achievable. We can control 90% for High voltage, while 80% for low voltage

• Various stamping tools available to save initial design

• Large material savings compared to one piece stator

• Various grade of magnet

• Better magnetic properties, low demagnetization rate, and high magnetic consistence

• Multi-poles ring magnet: more stable & stronger magnetic flux to lower motor space and improve performance and lower spacer
  

Designed experiences for winding stator and rotor

For customized DC Motors, please contact our technician. Ordinary, we have to know the following information to get a professional proposal:

• Brushed or Brushless   Customer preference

• Output power (W)   Horsepower/watts/torque rated at full load speed

• Voltage (V)   i.e 12v DC …….. 220v AC

• Motor speed (RPM)   Revolutions per minute of the shaft at full load Voltage 

• Application   e.g. traction, airconditioning, etc.

• Duty     Most motors are rated continuous. Some applications however may use motors designed for intermittent duty

• Configuration/Frame    Our products are according to IEC standard, we also can customize the flange and shaft according to the customer drawing 

• Controller function     e.g. forward/reverse, variable speed, acceleration profile, etc.