1700rpm 540W 74V Brushed DC Motor
- Model Number:DC0.54/74-126
- Type:Brushed DC motor
- Output Power:540W
- DC Voltage:74V
- Speed Range:1700rpm
- Enclosure:IP44 / IP54
|Brand Name:||Volcano Electric||Model Number:||DC0.54/74-126||Type:||Brushed DC motor|
|Output Power:||540W||DC Voltage:||74V||Speed Range:||1700 RPM|
|Controller:||Customized, Optional||Braker:||Optional||Insulation Class:||Class B/F/H|
|Enclosure:||IP44 / IP54||Poles:||4P, 6P, 8P…||Wire:||100% copper|
|Duty:||S1 (continuous)||Place of Origin:||Zhejiang, China (Mainland)||Standard:||IEC standard or NEMA standard|
|Application:||Boat, Car, Electric Bicycle, Fan, Home Appliance, Traction Motor, Solar Pump DC systems, bus A/C systems , other|
A typical Brushed DC Motor contains six components: Stator, Rotor/Armature, Commutator, and Brushes, an axle, and magnets.
The Brushed DC Motor has a relatively inexpensive start up cost and simple design. In some cases, the Brushed DC Motor can cost half the price of the Brushless DC Motor counterparts. However, the brushes within the Brushed DC Motor are apt to wear and require replacement, making it a higher-maintenance option, because of the long run costs.
1700rpm 540W 74V Brushed DC Motor the motor size is Dia 126, the Flange and shaft can be defined by the application, that can help to install directly.
All DC126 motors, up to 375w, are rated “Continuous Duty” and are TENV. 375W-540w are rated “Intermittent Duty” and is recommended that they operateonly for a short period of time to avoid overheating. If “Continuous Duty” is required, a cooling fan can be added to the motor.
These motors are Totally Enclosed Fan Cooled (TEFC) – same as TENV excepthas external fan as an integral part of the motor, to provide cooling by blowing air around the outside frame of the motor.
Insulation Class “F” = 155°C
*CAN MAKE ACCORDING TO YOUR REQUIRMENT
Performance of 540W 74V 1700rpm Brushed DC Motor
Some of our Brushed DC Motor list DC126
For customized DC Motors, please contact our technician, Ordinary, we have to know the following information to get a professional proposal:
Brushed or Brushless Customer preference
Output power (W) Horsepower/watts/torque rated at full load speed
Voltage (V) i.e 12v DC …….. 220v AC
Motor speed (RPM) Revolutions per minute of the shaft at full load Voltage
Application e.g. traction, airconditioning, etc.
Duty Most motors are rated continuous. Some applications however may use motors designed for intermittent duty
Configuration/Frame Our products are according to IEC standard, we also can customize the flange and shaft according to the customer drawing
Controller function e.g. forward/reverse, variable speed, acceleration profile, etc.