-
-
540W 150V 3200rpm Brushed DC Motor
- Model Number:DC0.54/150-126
- Type:Brushed DC motor
- Output Power:540W
- DC Voltage:150V
- Speed Range:3200rpm
- Enclosure:IP44 / IP54
Brand Name: | Volcano Electric | Model Number: | DC0.54/150-126 | Type: | Brushed DC motor |
Output Power: | 540W | DC Voltage: | 150V | Speed Range: | 3200 RPM |
Controller: | Customized, Optional | Braker: | Optional | Insulation Class: | Class B/F/H |
Enclosure: | IP44 / IP54 | Poles: | 4P, 6P, 8P… | Wire: | 100% copper |
Housing: | Aluminum | Efficiency: | IE 4.0 | Fan: | Optional |
Duty: | S1 (continuous) | Place of Origin: | Zhejiang, China (Mainland) | Standard: | IEC standard or NEMA standard |
Application: | Boat, Car, Electric Bicycle, Fan, Home Appliance, Traction Motor, Solar Pump DC systems, bus A/C systems , other |
Product Description
All DC126 motors, up to 375w, are rated “Continuous Duty” and are TENV. 375W-540w are rated “Intermittent Duty” and is recommended that they operate only for a short period of time to avoid overheating. If “Continuous Duty” is required, a cooling fan can be added to the motor.
These motors are Totally Enclosed Fan Cooled (TEFC) – same as TENV except has external fan as an integral part of the motor, to provide cooling by blowing air around the outside frame of the motor.
Insulation Class “F” = 155°C
540W 150V 3200rpm Brushed DC Motor is worked under the voltage 150VDC, if you need the brushed DC motors under other voltage, our engineer can design what you need. You can contact our sales team at info@volcanomotor.com for any advices.
Brushed motor Advantages:
Simplified wiring: Brush motors can be wired directly to DC power and control can be a simple as a switch.
Low cost Brushed DC Motor
Configuration
*CAN MAKE ACCORDING TO YOUR REQUIRMENT
Performance of 540W 150V 3200rpm Brushed DC Motor
Some of our Brushed DC Motor list DC126
Sort | Voltage | Speed | Output | Load | Torque |
(V) | (RPM) | (W) | (A) | (Nm) | |
DC0.37/12-126 | 12 | 1700 | 370 | 35 | 2.07 |
DC0.54/12-126 | 12 | 1500 | 540 | 55 | 3.3 |
DC0.375/12-126 | 12 | 1200 | 375 | 39 | 2.98 |
DC0.75/24-126 | 24 | 3500 | 750 | 38 | 2.04 |
DC0.54/24-126 | 24 | 2500 | 540 | 29 | 1.98 |
DC0.54B/24-126 | 24 | 2000 | 540 | 29 | 2.8 |
DC0.37/24-126 | 24 | 1700 | 370 | 19 | 2.07 |
DC0.54C/24-126 | 24 | 1500 | 540 | 31 | 3.43 |
DC0.4/24-126 | 24 | 1200 | 400 | 21 | 3.18 |
DC0.37/27-126 | 27 | 1500 | 370 | 16 | 2.35 |
DC0.37/29-126 | 29 | 1100 | 370 | 15 | 3.21 |
DC0.375/42-126 | 42 | 1400 | 375 | 11 | 2.55 |
DC0.54/48-126 | 48 | 2000 | 540 | 14 | 2.8 |
DC0.54B/48-126 | 48 | 1700 | 540 | 13 | 3.03 |
DC0.375/48-126 | 48 | 1500 | 375 | 9 | 2.38 |
DC0.54/60-126 | 60 | 1800 | 540 | 11 | 2.86 |
DC0.54B/60-126 | 60 | 1500 | 540 | 9 | 3.43 |
DC0.54/74-126 | 74 | 1700 | 540 | 9 | 3.03 |
DC0.5/90--126 | 90 | 1600 | 500 | 6 | 2.98 |
DC0.375/90-126 | 90 | 1750 | 375 | 5 | 2.04 |
DC0.54/90-126 | 90 | 1700 | 540 | 7 | 3.03 |
DC0.375/110-126 | 110 | 3200 | 375 | 10 | 1.11 |
DC0.375B/110-126 | 110 | 1750 | 375 | 4 | 2.04 |
DC0.54/110-126 | 110 | 1700 | 540 | 6 | 3.03 |
DC0.375C/110-126 | 110 | 1500 | 375 | 4 | 2.38 |
DC0.54/150-126 | 150 | 3200 | 540 | 4 | 1.61 |
DC0.54/180-126 | 180 | 2200 | 540 | 4 | 2.34 |
DC0.54B/180-126 | 180 | 2000 | 540 | 4 | 2.57 |
DC0.375/180-126 | 180 | 1700 | 375 | 2.8 | 2.1 |
DC0.54C/180-126 | 180 | 1500 | 540 | 4 | 3.43 |
DC0.375B/180-126 | 180 | 1500 | 375 | 2.8 | 2.38 |
DC0.375/250-126 | 250 | 1500 | 375 | 2 | 2.38 |
DC0.54/300-126 | 300 | 1200 | 540 | 2 | 4.29 |
For customized DC Motors, please contact our technician, Ordinary, we have to know the following information to get a professional proposal:
Brushed or Brushless Customer preference
Output power (W) Horsepower/watts/torque rated at full load speed
Voltage (V) i.e 12v DC …….. 220v AC
Motor speed (RPM) Revolutions per minute of the shaft at full load Voltage
Application e.g. traction, airconditioning, etc.
Duty Most motors are rated continuous. Some applications however may use motors designed for intermittent duty
Configuration/Frame Our products are according to IEC standard, we also can customize the flange and shaft according to the customer drawing
Controller function e.g. forward/reverse, variable speed, acceleration profile, etc.