Tex: +86-574-89065086 | Email: info@volcanomotor.comone-stop partner for motors & motor drives designing and manufacturing

Volcano Motor

Home > Products > Motor power-Brushed Motor > 1/2 HP Brushed DC Motor

    540W 60V 1800rpm Brushed DC Electric Motor

    • Model Number:DC0.54/60-126
    • Type:Brushed DC motor
    • Output Power:540W
    • DC Voltage:60V
    • Speed Range:1800rpm
    • Enclosure:IP44 / IP54
    1. Detailed information
    Brand Name:Volcano ElectricModel Number:DC0.54/60-126Type:Brushed DC motor
    Output Power:540WDC Voltage:60VSpeed Range:1800 RPM
    Controller:Customized, OptionalBraker:OptionalInsulation Class:Class B/F/H
    Enclosure:IP44 / IP54Poles:4P, 6P, 8P…Wire:100% copper
    Housing:AluminumEfficiency:IE 4.0Fan:Optional
    Duty:S1 (continuous)Place of Origin:Zhejiang, China (Mainland)Standard:IEC standard or NEMA standard
    Application:Boat, Car, Electric Bicycle, Fan, Home Appliance, Traction Motor, Solar Pump DC systems, bus A/C systems , other


    Product Description

    540W 60V 1800rpm Brushed DC Electric Motor, in our DC 126 motors, the rated power range are 375W-600W, are rated  “Continuous Duty” and cooling fan can be added to the motor.


    These motors are Totally Enclosed Fan Cooled (TEFC) – same as TENV except has external fan as an integral part of the motor, to provide cooling by blowing air around the outside frame of the motor.


    How to Select a Brush DC Electric Motor?


    The first step in selecting the appropriate Brush DC Motor is to determine your maximum required speed. Typically a gearmotor should be used for max speeds less than 1000 RPM, and a Brushed DC Motor only if max speeds exceed 1000 RPM.


    Next, decide what torque your application requires. When using a gearbox, be sure to select the appropriate gear ratio by dividing the maximum speed of the gearbox by the max desired output speed


    After you have determined speed and torque requirements, select a frame size for your Brush DC Motor that will fit your application


    To have a proper Brush DC Electric Motor in your application, do contact our engineer, we will advice you to a exact motor you needed. 


    Configuration

    M5-0000.png

    *CAN MAKE ACCORDING TO YOUR REQUIRMENT


    Performance of 540W 60V 1800rpm Brushed DC Motor

    M5-814-60V.png


    Some of our Brushed DC Motor list DC126

    SortVoltageSpeedOutputLoadTorque
    (V)(RPM)(W)(A)(Nm)
    DC0.37/12-126121700370352.07
    DC0.54/12-126121500540553.3
    DC0.375/12-126121200375392.98
    DC0.75/24-126243500750382.04
    DC0.54/24-126242500540291.98
    DC0.54B/24-126242000540292.8
    DC0.37/24-126241700370192.07
    DC0.54C/24-126241500540313.43
    DC0.4/24-126241200400213.18
    DC0.37/27-126271500370162.35
    DC0.37/29-126291100370153.21
    DC0.375/42-126421400375112.55
    DC0.54/48-126482000540142.8
    DC0.54B/48-126481700540133.03
    DC0.375/48-12648150037592.38
    DC0.54/60-126601800540112.86
    DC0.54B/60-12660150054093.43
    DC0.54/74-12674170054093.03
    DC0.5/90--12690160050062.98
    DC0.375/90-12690175037552.04
    DC0.54/90-12690170054073.03
    DC0.375/110-1261103200375101.11
    DC0.375B/110-126110175037542.04
    DC0.54/110-126110170054063.03
    DC0.375C/110-126110150037542.38
    DC0.54/150-126150320054041.61
    DC0.54/180-126180220054042.34
    DC0.54B/180-126180200054042.57
    DC0.375/180-12618017003752.82.1
    DC0.54C/180-126180150054043.43
    DC0.375B/180-12618015003752.82.38
    DC0.375/250-126250150037522.38
    DC0.54/300-126300120054024.29


    For customized DC Motors, please contact our technician, Ordinary, we have to know the following information to get a professional proposal:

    • Brushed or Brushless   Customer preference

    • Output power (W)   Horsepower/watts/torque rated at full load speed

    • Voltage (V)   i.e 12v DC …….. 220v AC

    • Motor speed (RPM)   Revolutions per minute of the shaft at full load Voltage 

    • Application   e.g. traction, airconditioning, etc.

    • Duty     Most motors are rated continuous. Some applications however may use motors designed for intermittent duty

    • Configuration/Frame    Our products are according to IEC standard, we also can customize the flange and shaft according to the customer drawing 

    • Controller function     e.g. forward/reverse, variable speed, acceleration profile, etc.

    Copyright © Ningbo volcanic electric co.,LTD